Straight connectors - HUCP-I - FluidFit HUCP Union connector tube to metal pipe (inch)
  • Straight connectors - HUCP-I - FluidFit HUCP Union connector tube to metal pipe (inch)

FluidFit HUCP Union connector tube to metal pipe (inch)

kr33.00
5 1
,
5/ 5
Tax included 1-3 working days

FluidFit® HUCP Union quick connector (Pushfit) from tube to metal pipe, available in several inch sizes. Select the desired size from the drop-down menu

Choose size
Quantity
I lager

Quick connectors from FluidFit® can be used together with or replace the connectors of other brands such as John Guest® or DMfit®. It pays to buy larger quantities, always a discount if you order more than 10 pieces and even more when you buy a whole box.

FluidFit JG DMF ØD1 ØD2 ØP1 ØP2 L Weight Box 
HUCP 1/4-5/16 g 1/4 5/16 19.3 20 41.4 96 50
HUCP 1/4-3/8 g SI030812S APSUC0604 1/4 3/8 19.3 20 41.8 94 50
HUCP 5/16-5/16 g SM040808S APSUC0505 5/16 5/16 19.3 20 42.9 95 50
HUCP 5/16-3/8 g SI041012S APSUC0605 5/16 3/8 19.3 20 43.3 112 50
HUCP 5/16-1/2 g SI41016S 5/16 1/2 19.3 23.6 48.2 12 50
HUCP 3/8-5/16 g SI041210S APSUC0506 3/8 5/16 22.3 20 45.6 114 50
HUCP 3/8-3/8 g SI041212S APSUC0606 3/8 3/8 22.3 20 46 114 50
 

HUCP5/16-5/16G
63 Items
2017-07-27

Download

Teknisk info & manual FluidFit

Download (357.58k)

FluidFit översättningstabell

Download (409.79k)
    How does Fluidfits fittings for steel pipes work?

    The Fluidfit Steel Fit fittings have been manufactured in order to satisfy the requirements related to the connection of stainless steel pipes with or in combination with hoses or other steel pipes 

    Instructions

    We recommend to read and follow all the instructions, precautions and warnings contained in this FAQ section before using the products in pressurized systems.

    Failure to follow all instructions, precautions and warnings may result in bodily harm or property damages. CDC Fluidtech Europe or any of it partners disclaims any responsibility in case of damages for wrong use of the products.

    How to connect

    For the part of the fitting to be connected to standard tubing (plastic or soft metal

    types), please refer to the instructions at the separate FAQ page. 

    Make sure that the tube size and the push-in system size of the fittings are the same.

    Cut square (90° angle) the part of the tube that has to be inserted into the fittings using the proper tube cutter. Do not use hacksaw.

    Make sure that the tube used is clean and does not present any scratch, crack, cut or deformity and always deburr the tube before the insertion in order not to damage the o-rings. Before inserting the tube,

    please remove any possible obstruction inside the fitting.

    Unscrew anticlockwise the nut by hands making two turns in order to fully release the fitting.

    Make sure that the tube is correctly and fully inserted.

    Inserting the tube into the fitting requires a moderate strain. The tube and the fitting

    should not be scratched or damaged during the insertion, otherwise there may be

    leaks or further wrong functions.

    Please, connect the tube by hands, without using any kind of tool, whether dedicated or not.

    Keep the tube into the fitting completely inserted and screw by hands the nut clockwise up to the fully screwed position.

    This will grant a perfect seal of the system and the tube will be fully gripped.

    How to disconnect

    Unscrew anticlockwise the nut by hands making two turns in order to fully release the fitting.

    Push the collet in the direction of the body of the fitting and pull the tube keeping

    the collet pushed in order to disconnect the tube from the fitting.