HULP-I - FluidFit HULP Union elbow tube to metal pipe (inch)
search
  • HULP-I - FluidFit HULP Union elbow tube to metal pipe (inch)

Fluidfit HULP pushfit elbow connection for metal pipes (inch)

kr32.00
Tax included 1-3 working days

Fluidfit® HULP push-fit connection elbow connection for metal pipes, available in several sizes. Select the size you want from the drop-down menu.

Select size: Elbow connection for metal pipes (5/16" hose x 5/16" tube)
Quantity
In stock

These push-fit connections from Fluidfit® can be used in conjunction with or replace push-fit connections of other brands from, for example, John Guest® or dmfit®.

It pays to buy larger quantities, always quantity discount when buying more than 10 pieces and even more when buying a whole box.

Fluidfit JG Dmf ØD1 ØD2 ØP1 ØP2 L1 L2 Weight Box
HULP 1/4-5/16G 1/4 5/16 19,3 20 35,1 35,3 111 50
HULP 1/4-3/8G SI030812S APSEU0604 1/4 3/8 19,3 20 35,5 35,3 109 50
HULP 5/16-3/8G SI031012S APSEU0605 5/16 3/8 19,3 20 35,5 35,8 103 50
HULP 3/8-5/16G SI0312S APSEU0506 3/8 5/16 22,3 20 36,6 39,5 124 50
HULP 5/16-5/16G SM030808S APSEU0505 5/16 5/16 19,3 20 35,1 35,8 106 50
HULP 3/8-3/8G SI031212S APSEU0606 3/8 3/8 22,3 20 37 39,5 122 50
HULP5/16-5/16G
44 Items

Download

Fluidfit technical info & ma

Fluidfit technical information and manual

Download (357.58KB)

Fluidfit translation table

Fluidfit Translation Table JG & DMFIT

Download (409.79KB)
    How does Fluidfits fittings for steel pipes work?

    The Fluidfit Steel Fit fittings have been manufactured in order to satisfy the requirements related to the connection of stainless steel pipes with or in combination with hoses or other steel pipes 

    Instructions

    We recommend to read and follow all the instructions, precautions and warnings contained in this FAQ section before using the products in pressurized systems.

    Failure to follow all instructions, precautions and warnings may result in bodily harm or property damages. CDC Fluidtech Europe or any of it partners disclaims any responsibility in case of damages for wrong use of the products.

    How to connect

    For the part of the fitting to be connected to standard tubing (plastic or soft metal

    types), please refer to the instructions at the separate FAQ page. 

    Make sure that the tube size and the push-in system size of the fittings are the same.

    Cut square (90° angle) the part of the tube that has to be inserted into the fittings using the proper tube cutter. Do not use hacksaw.

    Make sure that the tube used is clean and does not present any scratch, crack, cut or deformity and always deburr the tube before the insertion in order not to damage the o-rings. Before inserting the tube,

    please remove any possible obstruction inside the fitting.

    Unscrew anticlockwise the nut by hands making two turns in order to fully release the fitting.

    Make sure that the tube is correctly and fully inserted.

    Inserting the tube into the fitting requires a moderate strain. The tube and the fitting

    should not be scratched or damaged during the insertion, otherwise there may be

    leaks or further wrong functions.

    Please, connect the tube by hands, without using any kind of tool, whether dedicated or not.

    Keep the tube into the fitting completely inserted and screw by hands the nut clockwise up to the fully screwed position.

    This will grant a perfect seal of the system and the tube will be fully gripped.

    How to disconnect

    Unscrew anticlockwise the nut by hands making two turns in order to fully release the fitting.

    Push the collet in the direction of the body of the fitting and pull the tube keeping

    the collet pushed in order to disconnect the tube from the fitting.